The protection wire of the pump and its function

Thread Content

What are the types of protection wires for pumps? What is its function? There are 6 types of protection wires for pumps, whose purpose is to prevent damage to the pump and ensure its proper operation; the protection wires for pumps are selected based on the operating conditions. (1) Heat pump line – When transporting high-temperature oils with a temperature exceeding 200°C, a DN20–25 heat pump line should be installed if a backup pump is available ； (2) Low-flow line – When the pump’s operating flow rate is 30% below its rated flow rate, a low-flow line should be provided to allow the pump to operate properly at that lower flow rate ； (3) Balance line – For liquids with a saturated vapor pressure at room temperature that is higher than atmospheric pressure, or liquids that are in the bubble point state, a balance line must be installed to prevent vapor from forming in the liquid entering the pump or to stop bubbles from entering the pump and causing cavitation ； (4) Bypass line – used for the trial operation of the pump, or to keep the pump running when the main outlet valve is closed under abnormal operating conditions. Generally, a bypass valve with flow-limiting orifices is installed in situations where the pressure difference before and after the valve is very high ； (5) Anti-condensation system – When transporting liquids with a high pour point or high freezing point that solidify at normal temperatures, anti-condensation systems should be installed in the standby pumps and pipelines to prevent them from getting clogged ； (6) Safety valve line – For positive displacement pumps such as electric reciprocating pumps, gear pumps, and screw pumps, a safety valve line is provided on the outlet side; when the outlet pressure exceeds a set value, the safety valve opens and the fluid returns to the pump inlet pipe.