Are the NSK 7314B/DB bearings interchangeable with the SKF 7314B/DB bearings?
Thread Content
This post was last edited by gw821022 on 2011-2-9 21:34. Are NSK’s 7314B/DB bearings interchangeable with SKF’s 7314B/DB bearings?
I don’t understand what it means. 7314B/DB are back-to-back paired angular contact ball bearings with an inner diameter of 70, an outer diameter of 150, and a thickness of 35
Reply to 2# Dongcheng Xijiu zq: Sorry, I made a typing mistake! It has been revised again!
Personally, I believe they can be interchanged, since the models are the same and they represent the same meaning
The 7314B/DB bearings produced by NSK and SKF can be used interchangeably. One is manufactured in Japan, while the other is made in France; however, both adhere to internationally unified standards.
Reply to 5# pengfs: Just a reminder, it seems that SKF bearings aren’t made in France; they’re probably produced in Sweden!
Models with the same type can be interchanged, but it seems that SKF ones are of better quality
We use more NSK. . .
Reply 6# mjaline: The manufacturer of SKF bearings is AUSTRIA
The origin of SKF bearings that we commonly see seems to be Australia. These two bearings are identical; the only difference is the origin and brand, so they should be interchangeable
I think so too; they can be swapped. SKF products are indeed better, but only provided that they’re not counterfeit or fake. Currently, there are far too many counterfeit SKF products on the market; our company even requires a certificate of origin for them.