The domestic electromagnetic flowmeters have good quality
Thread Content
The domestic electromagnetic flowmeters have good quality. I would appreciate it if experts who use high-quality models in their own companies could share them.
Some people are posting to add points back and forth. If possible, also mention how many years it has been in use!
All companies are using foreign products now! I have no idea anymore....
We’re using Chongqing Chuanyi, and it doesn’t seem very good. If high standards are required, go with imported ones
The performance of domestic products seems to be more or less the same. The old manufacturer is probably in Kaifeng.
This post was last edited by sdzbln on 2011-3-2 at 19:50. Those from Shanghai Oujie also work fine (some of them have been in use for 4 years). Electromagnetic flowmeters used for grouting are quite representative in this regard.
It’s hard to say about domestic products; in our department, we have two units made by a factory in Shanghai. They’ve needed to be repaired twice, and the manufacturer’s technicians came to take a look, but they still don’t work properly. It’s really not worth spending extra money on such poor-quality products – it’s better to spend a bit more and get something that works well and doesn’t cause problems.
This topic is quite broad. In China, there are many branded products (such as Wilte, Starry Sky, Kent, Chuanyi, Kaifeng, etc.), and even more small-brand products. The key is to choose the appropriate product based on the operating conditions. Currently, the domestic brand Kolon (a joint venture brand) performs well in the water treatment industry, and Yokogawa’s electromagnetic products are also excellent and used to replace imported products in the chemical sector.
We used Kent’s, and it didn’t feel very good
Reply 1# zhangzijun2008 Quanzhou Rixin is better, right! !