How should the anode gasket be installed?
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 20:16. How should the anode gasket be installed? The two long sides of the anode are of different widths—one wide and one narrow. When attaching it, should the wider side be positioned near the upper part of the electrolyzer or the narrower side? What is the reason for doing this? ， ， -
The narrow edge is on top; I think it should be aligned with the cathode.
The narrow edge should be placed against the upper part of the electrolytic cell; the gasket should be inserted inward by 1 mm (1 mm from the sealing surface). Under no circumstances should the gasket be glued to the electrode mesh. During installation, apply the glue evenly in one go; do not apply it back and forth ； After folding the long and short sides of the mat, stretch it to the specified length and width (otherwise the mat will easily stick to the grid) ； When pasting, fix one of the long and short edge endpoints first, and then paste the opposite endpoint. These are just things that are easily overlooked during the process of attaching pads; there are many more, and it’s worth taking a look at the materials provided by other manufacturers, as they contain relevant information.
Attached to the narrow edge, level with the sealing surface or extending 1mm inward