Issues regarding the steam buffer tank and the steam pressure entering the furnace
Thread Content
This post was last edited by Chemical Gas Purification on 2011-3-6 at 11:27. Hello, everyone! I have a question regarding the steam buffer tanks in gas generation furnaces. Could everyone tell me what the steam pressure set for the steam buffer tanks in your respective facilities is, in MPa? What is the steam pressure entering the furnace during gas production? Let’s discuss what level of pressure would be optimal.
The issue raised by the original poster varies depending on the actual operating conditions and parameters of different factories, and it is also related to the operating practices of our own factory. The pressure in our company’s steam buffer tank is around 0.08 MPa, while the pressure of the steam entering the furnace is around 0.02 MPa.
They vary; the jacket pressure can be high or low. The normal value is around 0.06 MPa, and the pressure inside the furnace should not be too high, generally ranging from 0.015 to 0.025 MPa. It varies slightly depending on the quality of the steam temperature.