Problems with the mixer gasket
Thread Content
In a bottom-inserted mixing system, when the sealing is achieved using mechanical seals, is there a gasket between the flange at the bottom of the tank and the flange connecting to the mixing system?
This mechanical seal should be located on the flange at the bottom of the groove; gaskets may not be necessary
It depends on the specific situation; some require flanges.
Flange gaskets must be selected based on the pressure, temperature, and properties of the process medium
Some are gaskets, while others are O-rings; the bottom stirrer 201 used in Shanghai Petrochemical employs perfluoroether O-rings