Hoist lifting height
Thread Content
How is the lifting height of a vertical bucket elevator defined? Does it refer to the height between the feed inlet and the discharge outlet, or the height between the rotating shafts?
Reply to 1# yc123: There are different opinions on this issue; some people use the distance between the front and rear axles as a measure, while others use the distance between the inlet and outlet – it’s just that there’s no uniform standard! There’s no need to be too strict about this; it’s fine as long as the condition icon is cleared!
Technical parameters of bucket elevators: Model, Lifting capacity (m3/h), Bucket speed (m/s), Spindle rotation speed (rpm), Chain pitch (mm), Weight of moving parts (Kg/m), Maximum size of material pieces (mm), Volume (L), Bucket width (mm), Bucket depth (mm), Allowed percentage occupancy %: 10, 25, 50, 75, 100. NE15: 15, approximately 0.5, 16.54, 2.5, 250, 203.2, 101.6, 27.5, 65, 50, 40, 30, 25. NE30: 30, approximately 0.5, 16.54, 7.8, 300, 304.8, 152.4, 35, 90, 75, 58, 47, 40. NE50: 60, approximately 0.5, 16.54, 15.7, 300, 304.8, 152.4, 64, 90, 75, 58, 47, 40. NE100: 110, approximately 0.5, 14.13, 35, 400, 400, 200, 89, 130, 105, 80, 65, 55. NE150: 170, approximately 0.5, 14.13, 52.2, 600, 400, 200, 112.5, 130, 105, 80, 65, 55. NE200: 210, approximately 0.5, 10.9, 84.6, 600, 500, 250, 134, 170, 135, 100, 85, 70. NE300: 320, approximately 0.5, 10.9, 127.5, 700, 500, 250, 188, 170, 135, 100, 85, 70. NE400: 380, approximately 0.5, 8.3, 182.5, 700, 600, 300, 205, 205, 165, 125, 105, 90. NE500: 470, approximately 0.5, 7.1, 260.9, 700, 700, 350, 223, 240, 190, 145, 120, 100. NE600: 600, approximately 0.5, 7.1, 330.2, 800, 700, 350, 350, 240, 190, 145, 120, 100. NE800: 800, approximately 0.5, 6.2, 501.8, 800, 800, 400, 313, 270, 220, 165, 135, 110
Thank you for getting back to me. It was because the condition icons weren’t made clear that things got chaotic in the end, haha
It’s usually the height between the front and rear axles, right?
Some use the total height of heaven and earth, that is, the height of the entire device from the bottom to the top； Some use the center height, that is, the center height of the upper and lower drums or sprockets; any of those will work, as long as it is clearly indicated which height it is