Power matching for nanofiltration membranes
Thread Content
4 units of 8040 nanofiltration membranes, with a maximum pressure of 1.2 MPa and a water output of 4 t/h – what capacity pump is suitable for use, one pump or two?
Reply to 1# 305724675: One feed pump with a flow rate of 13 tons per hour and a pressure of 3 bar. After the pre-filter, there is another high-pressure pump with a flow rate of 13 tons per hour and a pressure of 12 bar. That’s sufficient.
Is the poster used for handling water? Still dealing with materials? According to what was said on the second floor, the energy consumption is way too high.