Tuning fork level switch
Thread Content
I would like to ask everyone: what parameters are required when selecting a tuning fork level switch? It is necessary to have alarms displayed on the DCS system. This is my first time using this type of device, so I’m not sure. Thank you very much!
Reply to 1# mengyousheng: The following parameters need to be provided: medium, maximum operating pressure, maximum operating temperature, maximum static pressure, material of the liquid-contacting components, type and dimensions as well as standards for connection to the process, output signal (such as relay output, contact capacity of 24V 1A). It is not clear whether a set point also needs to be specified. Most importantly, if it is in an explosion-proof area, an explosion-proof rating should be required