Which one is better for nitrogen compressors! !
Thread Content
This post was last edited by gader on 2011-4-11 at 12:27. Let’s share which nitrogen compressors everyone is using. Which one is more reliable: one with a pressure of 0.7 MPa or 10.0 MPa? ! !
Either Ingersoll Rand or Atlas will do; it’s mainly meaningful to compare which one has higher energy consumption and which one has a higher power factor.
I agree with the friend above. Additionally, there should also be a parameter—flow rate.
Ingersoll Rand’s machines have high requirements regarding water quality; poor water quality can easily lead to high exhaust temperatures and subsequent shutdown of the machine! Moreover, the manual outlet valve on the pipeline cannot be opened fully.
For low flow rates, I think the COOPER model is also good! !
Zhoushan Fumin, Hangyang, Jiangyang. .
The oxygen compressors of Kaifeng Air Separation Group are also quite good