Demulsifier dehydration and adhesion to the wall
Thread Content
:Funk: The crude oil is paraffin-based crude from Daqing, with a density of 0.88. After adding demulsifiers for dehydration, the degree of dehydration is very high; as a result, sticking to the walls occurs frequently, and there is a layer of flocs at the oil-water interface. How can this sticking phenomenon be eliminated? Is the oil in the water at the end related to the wall-adhesion phenomenon? Urgently need expert guidance on how to resolve this hanging phenomenon and eliminate the emulsion layer Which type of demulsifier is more effective in eliminating the wall-adhesion phenomenon in this situation? Any means that can solve the problem of hanging on the wall can be provided; thank you! ! Premise: The oil-soluble system of the demulsifier cannot be changed! ! Anxious, I have a headache!
Does your electro-decanter not have backwashing? It can be backwashed regularly.
Backwashing is available; after operating normally for a while, the water color turns black again, and the water sample contains oil
Is there a problem with the demulsifier system?
This is mainly a problem related to oil demulsifiers; it is possible to enhance the formulation by adding products that provide better water purification effects. Many products can be made oil-soluble, without affecting the overall system