Pipeline vibration
Thread Content
Do you have any good solutions for the vibrations in the cold transfer and circulation machine pipelines? Please help.
Find solutions for the sub-brackets, such as adding guides or spring brackets
The pipeline is fixed with brackets or equipped with shock absorbers
For vibration problems, it is necessary to look for the causes in installation quality, design issues, and pulses; only by addressing these issues can a lasting solution be found.
To address the problem fundamentally, it is necessary to find its source; the bracket still won’t work after a while
The cause of pipeline vibration needs to be analyzed; in some cases it is resonance, which makes it difficult to resolve.
As mentioned on the 5th floor, it is essential to ensure high quality during installation. If installation is already complete, then other solutions must be sought, such as strengthening the foundation of the circulation pumps, ensuring that the outlets of multiple circulation pumps are not located in the middle but at one end, reducing the resistance in the synthesis system, and reinforcing or adding more pipe supports.
There is a lack of technical support in this area domestically; pipes are reinforced as soon as they vibrate, without trying to find the source of that vibration.
First, locate the source of the vibration. If it’s caused by air flow, a orifice plate can be used for adjustment; otherwise, simply fixing it will do!
The source of vibrations in ammonia synthesis is nothing other than the pulsating air flow from the reciprocating compressors and booster cycles; given a specific buffer tank, how then can these vibrations be addressed? I wonder if anyone has any good suggestions