Compressor six-stage inlet valve
Thread Content
Why do the valve discs of six-stage imported valves often break
The copper washing section has liquid present and the discharge is not timely; I guess there should be no problems with your valve discs and springs, right?
Apart from the reasons mentioned above, it’s the quality issue of the valve disc.
We use methanol for purification, and we are currently replacing the valve elements with those from other manufacturers
Reply to 4# lzw299: The quality of the valve disc is the most likely cause; we have encountered this situation before as well.
1: Ensure proper lift control. 2: Use 3Cr13 material for the valve disc with a thickness of 3 mm. 3: Choose 17-7PH for the spring. 4: It’s available in Wen’an, Hebei