There is a hydrogen dehydration project
Thread Content
There is a pilot project for the deep dehydration of high-purity hydrogen: the inlet conditions involve 45% saturated water vapor, the outlet level of water content is 1 ppm, the operating pressure is 3 MPa, the flow rate is 150 NM3/h, and the adsorption cycle lasts 120 hours. For nitrogen (less than 50 m3) regeneration, which company can provide a complete set of equipment? Please send a preliminary plan and quote to the email address yang13469999005@163.com, or via QQ: 572522511 or QQ email
I sent you an email; please check it!
May I ask, for hydrogen at 0.6 Mpa and a flow rate of 2500 Nm3/h, can the water content after drying the hydrogen be kept at around 5 ppm? Is this product available?
Reply to 3# Macbeth: It’s easy to do. Check out the information on pressure swing adsorption
Reply 1# ml_oiou It’s easy to do. Variable temperature adsorption can be used. The dew point can reach -80