Do anyone have any good ways to deal with the sludge in the circulating pool! !
Thread Content
Thank you! ! Hehe. . . . .
You can search on Baidu for information on installing a water purifier
Add one set of recirculating water backwashing and purification equipment to carry out backwashing on a regular basis； Add some chemicals based on the water quality analysis of the circulating water ；
Aerobic microorganisms break down most of the organic matter in wastewater into pollution-free substances such as carbon dioxide and water; a small portion of this organic matter is used to synthesize cellular material, which promotes the growth of the microorganisms. The remaining sludge is then removed, allowing the wastewater to be purified before it is discharged
The key to a circulating water system – “sterilization, algae control, and bypass filtration are essential; attention must also be paid to scale prevention and corrosion inhibition.” If the first seven words are properly addressed, the sludge problem is basically solved.
Shutting down + draining + cleaning can completely solve the problem
1. Carefully control the concentration ratio of the circulating water and discharge it in a timely manner. 2. Reduce the conductivity of the makeup water. 3. Carry out effective sterilization and alga control to regulate the growth of bacteria and algae. 4. The drain valves of the heat exchangers in the circulating water system should be opened regularly to remove waste water. 5. Add a side filtration device. 6. Reduce dust generation around the cooling tower.
Install a water purifier on the inlet pipe of the recirculation tank. . The bottom of the circulating pool can be specially designed with a raised area in the center surrounded by grooves, and there are valves connected to it to allow for timely drainage of waste water
1. Carefully control the concentration ratio of the circulating water and discharge it in a timely manner. 2. Reduce the conductivity of the makeup water. 3. Carry out effective sterilization and alga control to regulate the growth of bacteria and algae. 4. The drain valves of the heat exchangers in the circulating water system should be opened regularly to remove waste water. 5. Add a side filtration device. 6. Reduce dust generation around the cooling tower.
Some water treatment chemicals can be added, such as disinfectants, descaling agents, corrosion inhibitors... Generally, specialized water treatment companies handle this, and the circulation tank should also be cleaned regularly!
The simplest way is to clean out the sediment while the main unit is stopped~~~