What is the specific consumption of ion-exchange membrane raw water and pure water for 300,000 tons?
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 23:52. What is the specific consumption of ion-exchange membrane raw water and pure water for 300,000 tons? # + + .
For the total raw water consumption (including losses in pure water production), you can use 8.5 m3/t as a basis for calculation
Reply to 2# nanren2: It’s not that high; the consumption of pure water per unit is 2.5 cubic meters, and including the losses associated with its production, it doesn’t exceed 3 cubic meters
This post was last edited by Yinozhang on 2011-5-18 at 15:18: 1 m3 of raw water per 100 units of lye, 2 m3 of pure water per 100 units of lye
What I mean is that all the water used in the entire chlor-alkali process should be counted as raw water (including system make-up water, sealant water, pure water, etc.)
Reply to 5# nanren2: How much raw water is needed to produce 1 m³ of desalinated water?
I recall the primary consumption levels in the ion-exchange membrane caustic soda industry: fresh water usage is less than or equal to 6 tons per ton of caustic soda produced
3.4 tons of clean water, 1.6 tons of pure water. unit consumption
Here, the consumption of pure water is 2.64 cubic meters per unit, while the consumption of raw water is 2.53 cubic meters per unit.