What are good solutions when there isn’t enough water during the production process?
Thread Content
Since the water is drawn directly for use, there is often a water shortage on the second floor. Is there any good solution? Is it possible to add a pressure tank?
Just build a water tower that is a bit higher than the location of the water taps on the second floor. Usually, water is pumped into the water tower so it’s available whenever needed.
It is possible to create a pressure tank, but the downside is that when there is a high demand for water, the pressure tank still cannot supply water in a timely manner. Adding a pipeline pump could also meet the requirements.
Industrial production requires large quantities of water – so how big would the water tower have to be? I was wondering if it would be feasible to use a pressure tank instead
It’s convenient to add a pipeline pump; it works similar to the water supply system in high-rise buildings. By connecting pumps in series, the head pressure increases, allowing water to be supplied to the upper floors.
A large amount of water is required during the production process; therefore, a reservoir must be built first to ensure an adequate supply of water, which is then pumped out using pressure pumps to maintain stable pressure.
It mainly depends on whether there is a shortage in the amount of groundwater when large amounts of water are used, or whether the head pressure is insufficient If the water volume is insufficient, another well must be dug; if the head pressure is not enough, a pump must be added.
Reply to 1# rui*nghua: A large tank can be added to store any excess water, and a pump can also be installed; this way, the pump can be used to supply water when the pressure on the second floor is insufficient
1. Add a pipeline pump 2. Add a buffer tank
Adding a booster pump at the bottom of the building will solve the problem