bjs600-2.5-87-6/25-4II
Thread Content
Please explain the specific parameters of bjs600-2.5-87-6/25-4II
Reply to 1#: A brief discussion on bjs600-2.5-87-6/25 -4IIB: The front-end tube box type is a head-type tube box; the shell type is a partitionless split type S. The rear-end structure is of the hook-loop type floating head. 600 refers to the nominal diameter, meaning the inner diameter of this heat exchanger is 600 mm. 2.5 indicates that the design pressure for both the tube side and the shell side is 2.5 MPa. 87 represents the nominal heat exchange area, which is 87 square units. 6/25 means that 6 is the nominal length of the heat exchange tubes, at 6 meters, and 25 is the outer diameter of those tubes, at 25 mm