How do tuning fork level switches prevent material buildup?
Thread Content
How do tuning fork level switches prevent material buildup? Or does the hanging material affect the tuning fork and cause false readings?
The load attached has an effect on the tuning fork switch; if too much load is applied, it can no longer vibrate. Install the prongs of the tuning fork vertically; this will improve the hanging condition, akin to changing a shovel from a horizontal to a vertical position.
OP, what medium are you measuring? ? ?The E+H tuning fork keeps getting stuck with material; I have to clean it every day, which is so annoying ? ? 、
Pay attention to the selection; those with hanging materials should be avoided. Or add a purge device.
Tuning fork switches cannot completely eliminate the problem of viscous media sticking to the prongs; this will definitely lead to false alarms. This is a characteristic of such products, and it cannot be resolved
Tuning fork switches cannot completely eliminate the problem of viscous media sticking to the prongs; this will definitely lead to false alarms. This is a characteristic of such products, and it cannot be resolved
Have you considered using a different method of measurement? Does the tuning fork come with a heating device? How about external ultrasonic level switches for non-contact medium measurement?