What does the control group on the monitoring interface in a DCS project mean? . ! !
Thread Content
What does the control group on the monitoring interface in a DCS project mean? . ! !
Simply put, in a large factory, due to its enormous scale and complex manufacturing processes, it is impossible for one operator (or one group of operators) to monitor and control everything. Therefore, the factory is divided into several sections based on the manufacturing process or other criteria; each section is handled by one operator (or one group of operators), with each group being responsible only for its own section and having no authority to operate on others’. Only engineers have permission to perform global operations
Reply to 2# windsorwin1: Thank you, I now understand a bit more; I’ll keep learning*. I’ll give you a score first~
As mentioned above, that’s the principle, but in practice, grouping is done only at the process level; members of other groups can still view the interfaces and perform operations of those other groups. In this way, if the computers in one group fail, other groups can temporarily monitor and operate them.
To facilitate operation by the staff, instruments from related workstations are placed together, allowing an at-a-glance view of the overall operational status. The CS1000 can display up to 16 internal instruments on a single screen; by using control group screens, it is possible to operate these instruments simultaneously, thereby eliminating the time required to bring up or switch between instruments； For cascade control, the primary and secondary control loops are placed in the same group to facilitate automatic switching.
The explanation on the 2nd floor is very detailed; grouping tasks helps to clarify responsibilities and prevents employees who are not assigned to a particular position from operating the equipment associated with that position.
The details mentioned on the second floor are quite thorough; grouping tasks helps to clarify responsibilities, enables more professional and targeted operations, and prevents employees who are not familiar with their role from operating the equipment assigned to them.
Reply to 4# baobao023: Is it what we use in our workshop – dividing things into several interfaces based on work sections, with those interfaces representing control groups?
Reply to 5# Rongcong2010: Is it the system that is commonly used in our workshop, with several interfaces created based on different work sections? Are those interfaces essentially control groups?
I noticed that you asked about: \"Control groups on the monitoring interface.\" That refers to the situation on the 5th floor, where 8–16 instrument panels are displayed on one screen… (just like the instruments on a dashboard); once a particular instrument is selected, it can be operated on – tasks such as switching between AUT and MAN modes, or modifying SV and MV values can be carried out. The response from the 2nd floor, on the other hand, refers to monitoring and operation groups.
Reply to 5# Rongcong2010: It seems what you said is quite close to what I asked. I’m just starting to learn CS3000, hehe