How to solve problems that occur when a centrifuge is in operation?

Thread Content

1) It enters the light-alkali tank through a filter, causing the mass fraction of NaCl in the light-alkali solution to exceed 15%, which often leads to blockages in the light-alkali pipes. (2) Using a pipe with a diameter of 0 108 nlin as the feed pipe is too large, making it difficult to control the feed volume; as a result, uneven feeding, machine vibration, and leakage often occur. (3) It has poor adaptability to the solid-liquid ratio of the material and to salt sludge; unstable feeding can cause vibration in the main machine, an increase in its current, and splashing of salt sludge. (4) The temperature of the material being processed is high, and the cooling water used for washing generates mist that escapes through the entrance, making it difficult to observe the feed rate and the thickness of the salt layer. (5) Bridging occurs in the separated filter cake, affecting discharging and causing vibration in the main machine. (6) The primary water consists of river water and the company’s recycled water; it contains snails, plastic, stones, etc. Using this primary water for washing often causes blockages in the washing pipes, and the recovered brine has a high alkalinity level.