Seeking help in selecting a flow meter
Thread Content
Medium: Circulating water; Pipe diameter: DN600. Length of the straight section: only 2 meters. Requirement: On-site indication of instantaneous flow rate (cable power supply is not possible). I would appreciate it if fellow marine engineers could help with the selection – it would be great if you could send me a sample of suitable options. Thank you very much
Since on-site power supply is not available, the portable ultrasonic flow meter from Fuji in Japan can be used.
The straight pipe section is very short; I want to choose a water meter with a large diameter
You can only use a large-diameter water meter for this! ! There isn’t enough straight pipe section! Other tables can’t be used!
Amagnetic flowmeters are quite good, aren’t they? Such large-diameter magnetic flowmeters are quite common.
It’s a battery-powered turbine; with such a large diameter, it must be difficult to choose one based on the on-site display