The best approach for measuring saturated steam flow rate
Thread Content
There are a wide variety of steam flow measurement instruments, but their actual performance varies greatly. Issues such as low measurement accuracy and poor stability have given rise to much debate; we invite everyone to share their opinions on which measurement method is the best.
For saturated steam, in pipes with a diameter of 250 or less, we generally use vortex flow meters; for larger diameters, throttle devices are used instead
If vortex flow meters are an option, go with them; of course, it’s important to choose the right ones, install them properly, and ensure they are of good quality
This post was last edited by leo 丶 torres on 2011-7-4 09:59. Measuring steam flow: 1. Generally, an LFX split-rotor steam flow meter is used, for temperatures up to 220 degrees. 2. When the temperature exceeds 250 degrees, vortex flow meters are usually chosen due to their relatively lower cost. 3. Depending on actual requirements, if high measurement accuracy is important, gas turbine meters can be used, but they are more expensive. 4. Gas turbines work as well, but the measurement principle is different; a flow velocity is required. I hope this can help you. Thank you