Flow integrator parameter setting
Thread Content
There is a LUGB-150 vortex flowmeter with pulse output; its instrument coefficient is 353.5, and the full-scale flow rate ranges from 170 to 3000 cubic meters per hour. It measures saturated steam with pressure compensation. Pei Changhui SWP—LK intelligent flow accumulation control instrument. How to set the parameters of the accumulator? How is the K coefficient calculated? Everyone, please help~~! I’m in a hurry~~:'(
This specifically depends on the instructions provided with the device. The parameters set for the digital displays of each manufacturer are different.
Reply to 2# Romantic Nozuta: I’m not very good at math; I really can’t figure out how to calculate that K coefficient~~ It’s frustrating
I’m not sure if this is correct; you should try it first. The K coefficient you mentioned is likely the meter coefficient of that flowmeter, and there’s no need for you to calculate it. If the displayed value is incorrect, it might be due to the density setting used in flow accumulation; this setting isn’t necessary as the system will retrieve the value automatically from the table. If that doesn’t work, add me on QQ: 727474379, and we can discuss it further together and make progress together