What precautions should be taken when dealing with gauge defects?

Reply to 1# zgj2405: 1. When the water level gauge becomes unclear, flush it according to the precautions for flushing. 2. In the event of a minor leak in the water level gauge, it is necessary to contact the maintenance team promptly and inform the relevant supervisors. Safety measures must be taken before shutting it down, and there should be a supervisor present. 3. When it is detected that the water level gauge has been automatically disconnected, a careful assessment on site is required; the situation should be reported to the supervisors and maintenance personnel should be contacted. The gauge must not be reconnected blindly. Disconnection must be carried out strictly in accordance with the prescribed procedures, safety measures must be taken before operating, and there must be a supervisor present. 4. When the water level gauge bursts significantly, the operator must wear heat-resistant clothing and carry out the isolation work under the supervision of a supervisor (from the team or department).