Notice from the Industry Sector regarding the joint organization of an industry safety knowledge competition with the Safety Sector
Thread Content
This post was last edited by zbx on 2011-7-12 at 19:11. In order to further increase the popularity of our industry area and to enable us to learn good management practices from other major areas, after discussing this with the staff from the Security area, we have decided to organize a \"Joint Industry Security Competition\" with them. The details are as follows: 1. Each sub-section should, based on its own specific circumstances, come up with at least five multiple-choice questions; the correct answers must be indicated, and these questions should be relevant to real-world situations and related to security； 2. Appropriate rewards will be given to the moderators who perform outstandingly in this event ； 3. The questions submitted by each person can be posted directly as replies in this thread ； 4. Finally, the industry section will assign a dedicated person to compile all the questions submitted by individuals. These questions will then be sent to the person in charge of the safety section, where they will be combined with the questions from that section to form a single set of exam questions, which will be submitted to the supervisor of the cleaners. The moderators of each section are asked to provide any additional opinions or suggestions regarding this activity; for now, it is essential that they do their best to create high-quality multiple-choice questions for their respective sections. This post will be pinned for a week
We should firmly support and actively participate; regular activities held on the forum help to boost the activity level of the section and increase everyone’s enthusiasm for engaging in discussions.
The wise decision to support super moderators
Support, as well as the implementation of performance during the Production Month and Activity Year
It is supported, as it has a positive effect on boosting the popularity of our region.
This post was last edited by ray1513 on 2011-7-15 11:20. Upvote! First, here are 5 multiple-choice questions related to safety: 1. A safety helmet must provide at least (C) millimeters of space between the person’s head and the top interior of the helmet in order to be usable. A、20 B、25 C、32 2. Workers must work in an environment with a high temperature of over 100°C; the working time must be strictly controlled, with no single session exceeding (A). A. 5 minutes B. 10 minutes C. 15 minutes 3. The pit should be equipped with a sturdy ladder for easy access in and out, with the top of the ladder extending at least (A) above the ground level. A、1 meter B、0.5 meters C、2 meters 4、What is the speed limit for forklifts when transporting goods? （ B ） A、3km/h B、5km/h C、10km/h 5、When working on a ladder, the angle between the ladder and the ground should be around （ ） degrees. (C ) A、30 B、45 C、60
1. The service life of a seat belt is (A) years; it should be retired in advance if any abnormalities are detected. A. 3–5 B. 4–6 C. 5–7 2. Safety belts should be inspected once after (A) years of use, depending on the batch in which they were purchased. A. 4 B. 3 C. 2 3. Which of the following is not considered a work-related injury? (B) A. Injuries sustained while commuting to and from work due to motor vehicle accidents B. Injuries to the hands caused by operating machine tools while under the influence of alcohol C. Injuries resulting from violating operating procedures at work 4. To prevent heat stroke in people working in hot environments, it is necessary to drink more (C) A. Purified water B. Soda C. Light salt water 5. The doors of electrical distribution rooms must open towards (C) to facilitate evacuation in case of an accident. A. Inner and outer surfaces B. Inner C. Outer 6. The incorrect statement regarding anti-static shoes is (A). A. Anti-static shoes can be used as insulating shoes. B. Anti-static shoes should be used in conjunction with anti-static clothing. C. The area where anti-static shoes are used should have an anti-static floor surface. 7. Using a carbon dioxide fire extinguisher in confined spaces can easily lead to (B) accidents. A. Poisoning B. Hypoxia C. Explosion 8. When performing artificial respiration, what should be done if the patient exhibits very weak spontaneous breathing? (A) A. Continue with artificial respiration, ensuring that its rhythm matches that of the patient’s spontaneous breathing. B. Continue with artificial respiration, but in a rhythm that is opposite to that of the patient’s spontaneous breathing. C. Stop artificial respiration immediately
Support safety zone activities and promote a safety culture.
We firmly support this event, as it not only boosts the popularity of the safety zone and enriches its content, but also helps everyone improve together.