Suggestions for optimizing the design of 30WT wet-process acetylene (we hope that all industry professionals will actively participate – generous rewards available! ）
Thread Content
Suggestions for rationalizing the design of 30WT wet-process acetylene! The overall process flow remains unchanged; it is recommended that the solution be practical, designed to facilitate operation after the system is put into use, improve employees’ work efficiency, reduce their workload, and enhance their working conditions (considerations can be given to calcium carbide dust), as well as address the issue of scaling in the liquid transfer pipelines
I was also fortunate enough to take a look at the technical improvement plan. The most innovative feature is the addition of an acetylene on-line detector to the upper discharge valve, which is interlocked with the upward flap valve. I like this. Chain, that’s what I do most in law studies.
No one is challenging you. One more! Our dreams from the past. Set the reciprocating feeder to feed on a timed basis. Enter the time required for one load, and it will stop automatically when that time is up! That way, I can sleep during night shifts, and I won’t have to shovel materials after work. Does the moderator think this idea is okay?