Low-pressure steam from the synthesis furnace
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 23:16. What should be the optimal pressure of the low-pressure steam generated as a by-product in a synthesis furnace? Is it based on the design pressure of the synthesis furnace? # + + .
The steam volume is determined based on your needs. The pressure of the steam generated as a by-product in current graphite furnaces is generally between 0.3 and 0.8 Mpa, while the design pressure of synthetic furnaces is set according to the steam pressure required by you.
The pressure control of the low-pressure steam generated as a by-product in the synthesis furnace is regulated by the pressure valve at the boiler outlet; however, the maximum pressure is generally specified during the design phase, with the highest operating pressure being determined primarily based on the strength of the graphite material and the graphite impregnation process