Can a sieve tray tower with two-phase flow be used?
Thread Content
This post was last edited by wu_pb on 2011-7-18 at 18:37. Can a sieve tray tower with two-phase flow be used for such a high liquid flow rate? The data are as follows: Liquid flow rate is 1425 m3/h, with a density of 468 kg/m3; gas flow rate is 22215 m3/h, with a density of 36 kg/m3. The surface tension of the liquid is 6.13 mN/m. Operation takes place at 3 atmospheres of pressure. There are 69 theoretical plates, and the gas-liquid mixture is fed at the 22nd plate
This post was last edited by wiseboy on 2011-7-18 at 19:32. For a detailed discussion in this section, please refer to: http://bbs.hcbbs.com/thread-839261-1-1.html. There is also the well-known calculation software WTR: http://bbs.hcbbs.com/thread-848011-1-1.html
Reply to 2# wiseboy: Thank you, it’s quite useful. However, since this software is in web version, many functions are not available; it seems that load performance charts cannot be generated
The load performance chart for the Web is normal; there are at least 3,000 people using it, which is quite good as a learning tool. The official version has only a few hundred members, all of them being reputable companies or individuals.