Coke oven gas plasticizer
Thread Content
Due to process requirements, it is necessary to compress atmospheric coke oven gas with a flow rate of 1 million cubic meters per day to an outlet pressure of 3.0 MPag. What type of compressor would be suitable for this purpose? Which are the more reliable manufacturers? What’s the approximate price? Thank you all!
That compressor alone probably won’t suffice; the volume of gas required is quite high
Shenyu’s compressors are good; 3 units can be used, with 2 in operation and 1 as a backup, and the pressure can reach 30 kilograms! Piston compressor, 4 stages, 6 rows
In China, it’s probably Shenmu; one unit alone probably won’t suffice. The capacity is too large
Three units – two in use and one as a backup will suffice! The hourly flow rate is 40,000 cubic meters, and the pressure can also meet your requirements
Reply to 5# gzy0416: Thank you so much!
Hehe, it’s just a personal suggestion; once the selection is made, just keep an eye on it. . . .
Over 40,000 cubic meters per hour – that’s quite low. Coking coal gas contains a relatively high amount of tar. . . It is recommended to undergo appropriate purification first. Centrifugal compressors are not recommended; if they must be used, reciprocating compressors should be chosen. Companies such as Shanghai Compressor Factory can manufacture them
When ordering the coke oven gas compressor in 2008, the price was 13 million; this is for reference only
13 million RMB – this is the price for 3 units
Reply to 10# gzy0416: Thank you so much!