How to select the container for use with a pump
Thread Content
The parameters of the pump are as follows: Inlet size: 80mm; Outlet size: 50mm; Flow rate: 50 cubic meters per hour; Height: 34M; Efficiency: 72%; NPSH: 3.2M. I need to choose a container to use in conjunction with this pump. The volume of the container does not need to be very large, nor too small – it’s best if it matches the pump perfectly! Thank you!
Is it import or export? Is it a closed-loop system?
Could you send the model number of the pump? The parameters may be incorrect. For a pump with specifications of 80-50-200, when equipped with a two-pole motor, the flow rate should be 50 and the head should be 50
It should be 80-50-160, right? As for how to match the containers, it depends on what function your containers are supposed to perform
I think it should be 80-65-160. As for how the containers mentioned above should be combined, it depends on the function you want the containers to perform; that’s correct.
I mean the tank won’t be pumped empty, so the tank needs to have a certain capacity!
It seems that the booster pumps produced by my factory are different from these. If you intend to make a purchase, you can contact the manufacturer directly; their sales and technical staff will help you select the appropriate model based on your specifications. If you are designing it yourself, it is still possible to seek advice from them. The manufacturers are more experienced in this field, and by finding the right person, you can get the issue resolved.