Outer diameter of cable that can pass through 1/2 NPT electrical connector
Thread Content
With a 1/2 NPT electrical connector, and an explosion-proof sealing fitting, can a 2*2*1.5 KVVRP cable be passed through? What about the electrical interface of the M20? Can it accommodate 2 pieces of 2*1.5 KVVRP cables?
Reply to 1# commander263: Generally, 1/2\" NPT is used for models of 1*2*1.5, while 1\" NPT is used for 2*2*1.5; there isn’t much difference among most manufacturers.
For Weidmüller’s Goran 1/2\" NPT type, the outer diameter of the cable that can be used is 6.0–11.7 mm
It’s possible; generally, the outer diameter of cables doesn’t vary much. For 2X1.5 control cables, the outer diameter is 8.6 MM, so it will fit
Thank you for the replies from everyone above. The question now is: I want to use a 2*2*1.5 cable – will it fit in? If that’s not possible, then a cable with a smaller cross-sectional area will have to be used
You can’t seal it; you can only use a gland, and the cable’s outer coating and shielding can be removed so that only the inner part remains
2X2X1.5 won’t work; ours has an outer diameter of 13.1, so we need to use 3/4
Specialized in providing a variety of sealing joints, 13372229196
4*1.5 plus the sleeve – likely dangerous.