Causes of over-temperature and over-pressure in the flash tank and treatment methods
Thread Content
Reason: A. The liquid level in the flash tank is too high； B. Severe scaling in the tube side and shell side of the heat exchanger, resulting in low heat transfer efficiency ； C、Pipeline blockage ； D. The amount of water entering the flash tank is too large. Solution: A. Lower the liquid level and maintain it at the normal value ； B. Clean the heat exchanger during the parking period ； C. Clean and clear the pipelines ； D. Reduce the amount of black water.
That’s right; keep encouraging, and go on like this in the future
I think an excessive system heat load can also lead to flashover pressure. It’s just my personal opinion; please feel free to give your feedback.