Bentley probe issue
Thread Content
Are the extension cables and preamplifiers the same for the Bentley 3300XL probe when measuring displacement, phase, vibration, and rotational speed? Thank you
The same! ! ! ! :):):)
Our factory uses Pilesse devices; the phase shift and vibration displacement are the same, while the rotation speed is slightly different
Displacement, phase shift, vibration. Extension cables and preamplifiers are the same; a preamplifier is not required for rotational speed, as the output for rotational speed is usually a frequency signal
The preamplifiers are all the same. Extension cables come in specific lengths; I think there are 5M and 8M versions, but I can’t remember exactly.
The preamplifier determines the type of probe and the length of the cable to be used; the entire measurement circuit must be matched. Some can be used interchangeably
Reply to 3# nihaocarter: How effective is Pailisi?
It seems that BENTLY can’t measure the rotational speed, right? Only the healthy parameters can be measured; these parameters can be used as a representation of rotational speed, but they are not exactly equivalent to actual rotational speed measurements.
Reply to 7# nmgsbl: It’s great; no problems have occurred
Reply to 7# nmgsbl: It’s mainly because of the low price
A preamplifier is not required for speed measurement. As for displacement and vibration, it depends on the specific probe model; different models require different preamplifiers and extension cables, and they cannot be used interchangeably