What is the typical value for the specific heat capacity per unit area for the heating of chlor-alkali plant buildings? Knowing the heating floor area, calculate the flow rate of the circulation pump. Urgent need

What is the typical value for the specific heat capacity per unit area for the heating of chlor-alkali plant buildings? Knowing the heating floor area, calculate the flow rate of the circulation pump. Urgent need

Reply to 2# wysWonderfulLife: There is no difference in heating systems between chlor-alkali plants and other factories. But I’m not sure which processes you are referring to regarding heating – and why heating is necessary in those processes The heating coefficient is determined based on the average winter temperatures, wind conditions in different regions, as well as the floor height, span, and total area of the building. For example, in the Shandong region in the north, the heating coefficient for residential buildings in winter is generally set at 80–110 W/m2; for insulated buildings, the lower end of this range is used, while for uninsulated buildings, the upper end is applied, or an intermediate value can also be chosen. Industrial buildings require separate calculations due to their high ceiling heights, significant heat loss, and temperature requirements influenced by the manufacturing processes. It is recommended that you consult a design firm, provide them with the details of your factory building, as well as the target temperature you desire, and then have them carry out calculations and designs based on your requirements and the local climate conditions.

Reply to 3# Benben Xuan: I just want to know how much companies of the same type usually charge; could you give me a rough estimate?

Reply to 4# wysWonderfulLife: This approach cannot be used as a model; please read carefully the content of the post on the third floor. If you are professional, you should be able to calculate it based on the specific circumstances. If you are not a professional, please mention your current conditions so that a design firm can handle it for you, or post them here so that capable users can assist you. When asking questions, avoid being vague; no one can help you answer meaningless questions. The third floor post provided you with basic parameter requirements; if you’re still looking for reference data, it shows that you didn’t read the post on the third floor carefully. For example, not even the most basic geographical requirements have been provided. I don’t know what the purpose of this post you’ve shared is. Additionally, you asked in another post about the pressure of the main pipe in ion-exchange membrane cells; the pressure varies from one cell to another, and it also differs depending on the manufacturer. Your supplier will provide you with the relevant parameters. Once again, when asking questions, avoid being vague; there should be specific sources and objectives. If you keep asking such unanswerable questions, you won’t get what you need.