If the quick-shut valve and the control air valve do not close properly, how to determine the right moment to disengage the disk drive
Thread Content
If the quick-shut valve and the control air valve do not close properly, how to determine the right moment to disengage the disk drive
Are you asking whether the quick-close valve and the control air valve don’t close properly, and also how to determine the right moment to disengage the rotating drum before restarting?
Are you asking about the timing for starting the cranking machine? That is, after starting the oil pump and adjusting the oil pressure, start the cranking machine before warming up the pipes. There isn’t really a better way; when stopping the machine, make sure to close the main steam valve as tightly as possible
Can a poor seal cause the compressor to start running abnormally?
Reply to 1# Enjoying Life with Buddha: Analyze the situation based on specific details: 1. It depends on whether your turntable mechanism is hydraulic or electric. 2. It is necessary to see whether the leak rate is sufficient to rotate the rotors of the turbine and compressor. 3. The control valve isn’t designed to close tightly in the first place.
If the quick-shut valve and the control air valve do not close properly, it can cause the compressor to start running unexpectedly