What oil is added to the reciprocating machine oiler?
Thread Content
Experts please talk about: What kind of oil does your reciprocating machine oiler inject and what are the standards?
Oil-free lubricated compressor, no need to add lubricating oil. There is oil lubricated compressor, and the oil injection amount is generally controlled at 10~15 drops/minute. ； The requirements in the unit manual shall prevail. Most reciprocating compressors now use oil-free lubrication designs.
Reply to 1# Zhongyuan people generally add whatever oil they use for compressors, and the oil injector should be filled with it. The standard is the standard for compressor oil.
We use blower lubrication oil
Generally follow the manufacturer's instructions. Our compressor is filled with Shell M460# gear oil.
Check the instructions. In addition, 10~15 drops/minute is a wrong statement. There is no empirical formula for this, and each manufacturer is different. I encountered a Dutch Thomas reciprocator with a minimum of 6 drops per minute.
This post was last edited by lovestory on 2011-9-23 17:25 Mobil Teliso\T150 anti-rust turbine oil
I remember that Cooper's machine has a calculation formula for reciprocating oil injection. The oil standard depends on the machine's operating speed. Generally, SAE40 can be used on machines with 1000-1800 rpm. The centrifugal type usually uses turbine oil or other. You can also look at API 618.
For my Mobil Rarus 429#, the selection of lubricant should be recommended in the compressor manual, as well as the temperature and pressure of the medium you are compressing. . relevant
Is the oil filling amount of DAB150# the same as that of the compressor? It can be adjusted appropriately based on experience.
Reply 1# People in Central China generally use N46# turbine oil