I would like to ask what the viscosity of Daqing crude oil and Hailar crude oil is approximately, thank you

The last edit to this post was made by dugutianzuo5 on 2011-10-29 at 10:29. The crude oil in Hailar can be roughly divided into four categories: The crude oil from Section 2 south of Well Huo 3 has an extremely low density, less than 0.8 g/cm3； The crude oils of Type 2 Bei 3, Bei 301, and Bei 302 are also relatively light in quality, with a density of 0.81–0.83 g/cm3 ； Crude oils of types 3, Be12, Be14, and Be16 are normal crude oils, that is, medium-density oils, with a density of 0.83–0.87 g/cm3 ； The last category is the crude oil from Well Bei 13, with a density greater than 0.87 g/cm3. (The above data are sourced from CNKI). The density of Daqing crude oil is currently 0.855–0.87 g/cm3; it used to be lighter as well, but not anymore. There are also differences among various oil production plants. What do you plan to use it for? There’s no need to ask such detailed questions on your behalf. I’m sorry, I didn’t see the question clearly. The first category has a viscosity of less than 2 mPa·s ； Then 10 ； 50 ； Greater than 50. Daqing 20-24.