Boiler flue gas emission standards
Thread Content
This post was last edited by dongjiang1001 on 2011-11-7 at 18:16. Our factory uses 35T coal-fired chain boilers; what are the **specified flue gas emission standards? Also, are there any regulations regarding the smoke monitoring points (where samples should be taken or monitoring conducted, at the outlet of the exhaust fan or at a certain height in the chimney)?
It is specified in the Standards for Emissions of Air Pollutants from Boilers GB13271-2001.
This post was last edited and replied to by piter_1984 on 2011-11-7 at 16:55. Reply 2# zfross: It specifies boilers of 65T and above. I need the specific standard specifications suitable for the boilers in our factory.
“ This standard applies to the management of air pollution emissions from combustion, oil-fueled, and gas-fired boilers of various capacities and uses, with the exception of coal-fired power generation boilers and boiling, oil-fueled, or gas-fired power generation boilers with a single unit capacity exceeding 45.5 MW (65 t/h). Upon closer inspection, it is not required that the boilers in question must have a capacity of 65 t/h or more; the standard also specifies emission standards for naturally ventilated boilers (with a capacity of 1 t/h or less)