A lot of water often accumulates in the cylinders inside the workshop, especially at the ends of the system. How can this be resolved?
Thread Content
.Compressed air system: compressor – refrigerated dryer – air storage tank – workshop. A lot of water often accumulates in the cylinders inside the workshop, and this problem is particularly common at the end of the system. How can this issue be resolved?
The air contains moisture; the higher the temperature and pressure, the more moisture there is in the air； When compressed air, which is hot and pressurized and contains water, is cooled and depressurized, the water in the compressed air is released – and this is why there is water in the pipes ； It is recommended to use adsorption dryers, as they perform much better in terms of water removal and avoid the issue of ice buildup compared to cold dryers ； In particular, the modular desiccators produced by Beten Technology offer excellent results ；
Check whether there is a problem with the cold dryer, or if the humidity of the air at the compressor inlet has increased during this period.
Installing an NT-110F compressed air filter in front of the cylinder will completely solve your problem!