Disruption of the heat source for the reboiler in the catalytic cracking tower
Thread Content
How to adjust stability after a disruption in the heat source for the catalytic cracking tower? Please be more detailed
The stripping tower is primarily used to desorb the C2 components; insufficient heat supply at the bottom of the tower results in incomplete desorption of these C2 components. As a result, the concentration of C2 components in the liquefied gas output from the stabilizing tower exceeds the specified limits, causing the pressure in the stabilizing tower to rise. The pressure in this tower must be controlled by venting non-condensable gases； Cut off the reboiler and handle it as soon as possible; also pay attention to the feed pump of the stabilizer to prevent vacuum conditions from occurring