Reasons for fluctuations in the initiator level
Thread Content
This post was last edited by clq20040107 on 2011-11-22 at 14:53. Seeking advice from experts in aggregation – what are the reasons for fluctuations in the level of the initiator liquid? The initiator storage tank is equipped with coil cooling water and stirring, and the circulation pump is constantly in operation to circulate the fluid. The cooling water supply is disconnected. Please help identify the cause of the fluctuating liquid level
Reply to 1# lpf2011: There are several reasons: First, the low-voltage contacts of the instrument are not in good condition, which results in the signal becoming weak at times； II. There is not much liquid in the tank, and the stirring speed is high, resulting in vortices that cause fluctuations in the liquid level ； III. There is not much liquid in the tank, and the circulation pump has an excessive circulation rate and is not operating properly.