Negative pressure appears after the vaporization tower
Thread Content
After vaporizing in the tower, regular gasoline was injected into it, only to find that the tower was under negative pressure – what’s going on?
A tower steamed with vapor? Negative pressure occurs after the steam condenses, which is normal. After the steam cooking tower is finished, it should be immediately purged with nitrogen.
This is a very common occurrence; as mentioned above, it’s necessary to take thorough precautions, otherwise serious problems can arise.
Reply to 3# yy1007: Thank you so much, Brother Chao, for your support; I’m truly honored!
Negative pressure occurs because the steam in the tower condenses into water, resulting in a reduction in volume; it is important to ensure that the vent at the top of the tower and the drain for condensed liquid at the bottom of the tower are open during the cooling process.