Smelting Daily Question 11.25 (English Version)
Thread Content
1. Please hide your replies; editing after posting is ineffective! Delete directly without hiding! 2. Method to hide: http://bbs.hcbbs.com/thread-492556-1-1.html 3. 10 points or 1 charm for a complete correct answer, 1 point for a completely wrong answer, and 5 points for an answer that is somewhere in between. Deoxidizing agents—additives used to bind the oxygen dissolved in liquid steel—are often added right after the refining process. The answer to this question can be found in the next question. The answer to the final question is: The rapid rise in demand for alloy steels during and after World War II led to the construction of furnaces with greater capacity and lower energy consumption per ton of steel. During and after World War II, the surging demand for alloy steels necessitated the building of furnaces that could produce more steel while consuming less energy per ton.
Deoxidizers are added primarily to reduce the dissolution of oxygen in the molten steel; they are usually added immediately after refining
Deoxidizer – oxygen with increased binding capacity dissolved in the liquid – is often added immediately prior to the refining process. Reply 1# FILTRATION-MAN
After the refining process is completed, a deoxidizer is usually added immediately to remove the oxygen dissolved in the molten steel.
Reply 1# FILTRATION-MAN: Deoxidizers that can increase the dissolved oxygen in molten steel are usually added immediately after the refining process.
Reply 1# FILTRATION-MAN: Deoxidizers are added immediately after the refining process is completed so that dissolved oxygen can combine smoothly with the molten steel.
Deoxidizers – added when oxygen is dissolved in the steel tank – are often added immediately after the refining process.
Deoxidizing agents – substances added to bind the oxygen dissolved in liquid steel – are often added immediately after the refining process. Deoxidizers are additives used to bind the dissolved oxygen in steel, and they are typically added right after the refining step is completed.
Reply 1# FILTRATION-MAN: After the refining process is completed, deoxidizers should be added to the molten iron promptly in order to control the amount of oxygen dissolved in it
Reply 1# FILTRATION-MAN Deoxidizer – a means to replenish the oxygen dissolved in the molten steel; it is usually added immediately after the refining process
Add a deoxidizer to remove the oxygen dissolved in the liquid iron, and then proceed immediately to the refining process