Everyone, please help! Select pump......
Thread Content
We are looking for a pump to circulate silicone oil at temperatures of 150–200 degrees. The viscosity of this silicone oil at room temperature is around 110 cp, and the flow rate required is 1 m3/h. We also need a pump with a sufficient head. I’m not sure if there is any suitable pump available, nor do I know any manufacturers. Thank you all
Reply to 1# smallpony2005: We specialize in Austrian KRAL triple-screw pumps. I was wondering if you are considering using imported pumps?
Diaphragm pumps work fine. It’s still necessary to know the head in meters
A gear pump will do; there’s no need to elaborate on its advantages
Reply to 1# smallpony2005: We recommend the IMC type magnetically driven chemical process pump, which is suitable for transporting high-temperature silicone oil. Visit www.shunda163.cn for more details
Arc gear pump, QQ496521249
Gear pumps are the preferred choice; in China, those from Botou are an option, while for imported ones, Viking can be considered. For the operating conditions you mentioned, domestic versions should not pose much of a problem.
Thank you all for your recommendations. I’ve chosen a gear pump from Botou; let’s see if it works. If not, then I’ll go with an imported one