Formula for calculating the filling rate of storage tanks
Thread Content
For example, in a storage tank with a capacity of 50,000 cubic meters, if the tank height is 19.46 m and the liquid level reaches 50,000 cubic meters at a height of 17.6 m, then if the current liquid level in the tank is 10 m, what should be used as the filling rate: 10/19.46 or 10/17.6?
It should be the ratio to the designed liquid level
It should be the ratio of the designed liquid level, that is, the height at which the high liquid level alarm is triggered.
It should be the ratio of the designed liquid level, that is, the height at which the high liquid level alarm is triggered. Agree with what was said above!