What is the inlet pressure setting for chlorine compressors among you?
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 20:33. Most chlorine compressors operate under negative pressure, but are there any chlorine compressors that operate under positive pressure? What is the inlet pressure control for chlorine compressors operating under positive pressure? How many stages of compression does a chlorine compressor have? What’s the pressure at the distribution station? # + + . hcbbs
Jinhua 4H—3 type chlorine compressor: the imported negative pressure is controlled at -7.5 to -11.2; it features three-stage compression, with the distribution pressure controlled at 160 to 200 kPa
German 3K. The inlet pressure is roughly at atmospheric level, while the outlet pressure is around 0.4 MP
The chlorine compressor features four stages of compression with a first-stage pressure of 0.04~0.06 MPa. Level 2: 0.1~0.14MPa. Level 3: 0.18~0.23MPa. Level 4: 0.3~0.38MPa.
For the turbine scrubber at Jinxi Chemical Industry, which produces 200,000 tons of chlor-alkali products, an inlet pressure of 2 kPa is sufficient; this value can be adjusted according to the process requirements.