The filling factor of the 108 polymerization reactor, and the water-to-oil ratio.
Thread Content
The filling factor of the 108 polymerization reactor, and the water-to-oil ratio.
Our factory’s LF-110 type polymerization reactor has a filling coefficient of 0.9, with a water-to-oil ratio of approximately 1:1
The filling factor and oil-to-water ratio of the 108 polymerization reactor are related to the model and formula being produced. The filling coefficient generally does not exceed 0.9, mainly for safety reasons. The water-oil ratio of type 5 material can reach 0.9; of course, the corresponding dispersion system needs to be adjusted. Type 7 material can achieve a water-to-oil ratio of 1.1.
The filling coefficient should be 0.9, and not exceed 0.9