Air source for catalytic booster
Thread Content
Why is the air source for the catalytic booster the main air supply? What’s the reason? Is it okay if the wind source is not the main wind but the natural wind of the atmosphere?
Save energy by using air from the main fan; increase the wind speed through pressurization to serve as an excellent catalyst fluidization medium
Pressurized air is also a source contributing to charring; by using a stepwise pressure increase, power consumption can be reduced. Of course, during the design process, the main air flow is considered separately; there is also pressurized air that is drawn directly from the atmosphere.
If air is used alone, the motor power required of the compressor to raise the outlet pressure of the pressurized air to the designed level is extremely high
Using main air allows the booster to have a certain pressure at the time of air intake, thereby reducing energy consumption……
A main fan is used to provide air supply for the booster pump
This post was last edited by Cuaili Yisu on 2012-1-9 at 11:57. Is it possible to take advantage of the fact that the main wind temperature is higher than the atmospheric temperature?
It is mainly for energy-saving reasons; the compression level is reduced