Temperature transmitter selection!
Thread Content
Help choose a model for a temperature transmitter; the measurement range can be either 0-60°C or 0-100°C. It needs to be installed on a horizontal straight section of pipe with DN150 and PN2.5 specifications. It’s best to be from Rosemont.
First, select the measuring element; it is recommended to use a PT100 platinum resistor mounted on a pipe flange, with an insertion depth of L=150 being appropriate. It comes equipped with an integrated temperature transmitter, and you can decide on the measurement range yourself!
Temperature transmitters – there are so many of them! Where are you going to use this? What medium’s temperature is being measured? What is the output signal?
The armored thermoresistive strip can integrate temperature sensing
Tell the manufacturer the pipe diameter, the material flowing through it, the temperature range, and the signals that need to be output; they will meet your requirements.
150 units of insertion depth – that’s way too deep. Half of it should be enough, right?
Here’s a contact way: Manager Xiao at 13601054174. Far East specializes in temperature-sensitive products